How to Install Torch Down Roofing in Nigeria

Torch Down Roof Application in Nigeria

  • Step 1: Attach insulation
  • Step 2: Lay down a moisture barrier
  • Step 3: Install the overlay board
  • Step 4: Apply the base sheet
  • Step 5: Apply the cap sheet
  • Step 6: Install flashing
  • Step 7: Water resistance
  • Step 8: Flexibility and durability

How to install Touch down roofing in Nigeria
What materials are needed for a torch down roof?

All torch down roofing is made from modified bitumen, or bitumen with additives. Bitumen is made from asphalt, a tough material that is used in many roofing applications. Manufacturing torch down roofing requires modifying or mixing the bitumen with a polymer

How thick is torch down roofing?

The 2 Ply MB Torch Down Roofing Membrane is 3/8″ thick and can be installed directly over an uneven stone surface without being compromised by punctures.

What goes under torch down roofing?

A mat of fiberglass, polyester, or other material is often used as a sturdy core for torch down roofingmembranes. Manufacturers also may embed small granules into the top of the membrane to add fire resistance, color options, ultraviolet (UV) radiation protection, or other distinctive characteristics.

Do you need underlay for torch on felt?

While roofing felt isn’t the cheapest, it’s one of the most effective systems. The torch-on felt solution relies on a three-layer system, which will requiretwo levels of underlay underneath the cap sheet.

How long does a torch down roof last?

The lifespan of a torch down roof is one of its main selling points, at 15 to 20 years. Torch down roofing is more long-lasting than some other types of flat roof systems. This is due to its flexibility in hot and cold temperatures, as well as its resistance to water damage.

How do you seal a torch down roof?

How much does a torch on roof cost?

On average the cost for torch-on roofing systems can vary between $400 and $1000 per square foot. The variability in costs depends on a number of factors including the quality of the materials used, seasonal price fluctuations, and even the expertise of the roofing professional.

Can you coat a torch down roof?

Torch Down/Mod-Bit Roofs Liquid Rubber CoatingsFor about a quarter of the cost, you can add approximately 10 years to your roof.

What is the best flat roof coating?

Silicone is quickly becoming the go to material in the flat roof coatings market. Its benefits range from leak-free protection to improved aesthetic appeal of the roof to improved sustainability. When a silicone roof coating is installed, it is there for performance.

Can I paint roof tar?

As long as the tar is well adhered you shouldn’t have any issues painting it. You need to use latex primer as an oil base primer will soften up the tar making it bleed thru the primer. It’s pretty similar to wall paint, as you can spray, roll, brush it on to any surface.

What is the best material for a flat roof?

How to install touch down roofing in nigeria

For many projects, PVC roofing is our preferred choice as the best flat roof material on the market. PVC roofing is somewhat more expensive than other single-ply commercial roofing materials, however it offers a wide range of benefits for the price.

Why are flat roofs so expensive?

As a result, rain and snow tend to build up or puddle at various spots on the roof, which often causes leaks as the water sits there for quite some time. For this reason, flat roofs tend to cost more overall than pitched roofs.

Are rubber flat roofs any good?

Long-Lasting. Rubber roofing is extremely durable. An EPDM roof is very easy and cost-effective to repair too. Compared to other materials, there are fewer seams, meaning it’s extremely rare for a rubber roof to leak.

What is the longest lasting flat roof?

PVC Single-Ply MembraneThe most popular flat roof material is a PVC membrane. It is designed to last between 15 and 30 years, making it the longestlasting flat roofmaterial you will find. It should come as no surprise that many commercial roofing contractors will only install a flat roof if it is PVC.

Are flat roofs bad?

Flat roofs generally require a greater degree of maintenance – even more so if the surface is disturbed and damaged by people frequently walking over it. Flat roof drainage is historically not as effective as traditional pitched roofs and standing water (ponding) can be an issue if falls are not adequate.

What is the best plywood for a flat roof?

Plywood for a roof deck should be of marine grade and suitable for external use to BS EN 636 or a bond Class 2 or better, complying with BS EN 314 (check). Plywood boards used for the deck should be: a minimum thickness of 18mm (these will be able to span up to 600mm). double nailed at each joist.

Can you put metal roof on flat roof?

Metal works wonderfully on flat roofs that have a low pitch! Known for its durability, metal roofs are a green solution that can last several years and require very little maintenance. There are two types to consider for your flat metal roof: standing seam and MasterRib® – or corrugated metal panels.

What is the minimum pitch required for a metal roof?

The minimum slope for lapped, non-soldered seam metal roofs without applied lap sealant shall be three units vertical in 12 units horizontal (25-percent slope). The minimum slope for lapped, non-soldered seam metal roofs with applied lap sealant shall be one-half unit vertical in 12 units horizontal (4-percent slope).

Do you need to put tar paper under a metal roof?

The simple answer is yes, your roof does need an underlayment. If your metal roof is going on top of asphalt shingles, then there is already an underlayment, and it likely doesn’t need another. Keep in mind, however, that expansion and contraction of the shingles could cause damage to the back of the metal over time.

Are metal roofs good for low pitch roofs?

The best profiles to use for lowslope projects will be mechanically-locked metal roof systems. Mechanically seamed panels are rollformed with specific edges that line up with each other. Once the two panels are engaged, a hand or mechanical seamer is used to bend the edges and lock the panels together.

What is the best roofing material for a low pitch roof?

Rubber roofs are a top choice for flat or low pitched roofing as it adheres to the roofing materials below it and, when installed correctly, provides a watertight seal to the elements. Choosing the best low slope roof materials often comes down to weighing the pros and cons based on your home and your needs.

What is the lowest pitched roof you can shingle?

What is the Minimum Slope for an Asphalt Shingle Roof. The short, simple answer is 2:12 has traditionally been considered the absolute minimum acceptable roof slope suitable for asphalt shingles. Asphalt shingles continue to be the most widely installed roof covering option in North America.

Do you need underlay for torch-on felt?

Underlay – 2mm. The torch-on felt underlay layer bonds to the venting layer and comes finished with sand on the top. With this in mind, it should be cut to size to suit the measurements of the roof for a neater finish.

How much should roofing felt overlap?
Roofing Requirements

Roofing felt is required to overlap 2 inches over the lower felt course. The overlapping felt creates a secondary barrier for moisture and wicks water away from the shingles above and the sheathing below. Therefore, a 2-inch overlap provides redundancy at the edges where the barrier is weakest.

How long will a torch down roof last?

12-15 years

Sheets are “torched down” so they adhere to the roof and seams are joined. These are well suited to most climates, though heavy rain and snowfall can compromise the life expectancy of torch-down roofing systems. On average, these roofs last 12-15 years and represent a great value for most buildings with flat roofs.

Chinedu Okeke

Chinedu is the founder of Nigerian Tech. He is a tech enthusiast who has the passion for emerging trends in the tech industry. He is also a professional web content developer.

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!